How do I fix the B200 error on my Canon printer?

How do I fix the B200 error on my Canon printer?

How to Fix the Canon B200 Error

1. Reset the printer.
2. Remove any obstructions.
3. Clean the printer head.
4. Manually clean the print head.
5. Remove old ink.
6. Re-install the printer drivers.
7. Try a new ink cartridge.
8. If none of the above methods work, then the B200 error is probably accurate.

What does error message B200 mean on a Canon printer?

print head
The dreaded B200 Error on your Canon Printer usually indicates that the print head has died! When re installing the print head make sure that the ribbon cable connector is firmly plugged in to the print head itself (this usually applies to older models).

How do I factory reset my Canon Pixma printer?

How to Factory Reset a Canon Printer: Instructions

1. Press Setup on your Canon device, then navigate to Device settings through arrow keys and press OK.
2. Now, navigate to Reset setting, then press OK, and then navigate to Reset all option.
3. Press OK, then select Yes, and therefore, your device is now reset.

What does P2 mean on my Canon printer?

4/27/17. On my MG2220 I get the error code P2 which indicates a paper jam.

How do I restore my Canon printer to factory settings?

1 Factory Reset

1. Press Setup.
2. Press the arrow buttons until you navigate to Device settings and then press OK.
3. Press the arrow buttons until you navigate to Reset setting and then press OK.
4. Press the arrow buttons until you navigate to Reset all and then press OK.
5. Select Yes.
6. Press OK. Your device is now reset.

How do I reset my Canon mx475 printer?

Restoring Network Settings to Factory Default

1. Press the [Setup] button (A) on the printer.
2. Use the arrow buttons (A) to select [Device settings] and press the [OK] button (B).
3. Use the arrow buttons to select [Reset setting] and press the [OK] button.

What does the B200 error mean on a Canon printer?

At its most basic level, the B200 error indicates a faulty print head. A print head is a part that distributes the ink from the cartridges onto the paper, meaning it’s one of the most important aspects of the entire printer.

Why is there an error code on my Canon printer?

It’s frustrating when you need to print something important, and an error code pops up. One of the most feared Canon printer errors is B200, which can indicate a potentially catastrophic error with the device. Don’t junk it immediately, though.

What to use to clean canon B200 print head?

Manually clean the print head. Use either pure alcohol or a non-oil-based cleaner on the print head’s gold contacts. Use a microfiber cloth to rub the cleaner onto the contacts, then let it dry completely before reconnecting. The print head is very fragile, so handle it with care. Remove old ink.