What is code for GFCI in kitchen?
Every receptacle installed in kitchens must be GFCI-protected. This new rule sets up an interesting situation. Sec. 210.8(A)(6) for dwelling units only requires GFCI protection for 15A and 20A, 125V receptacles installed to serve dwelling unit kitchen counter surfaces.
Is a GFCI required in a kitchen?
Kitchens: GFCI protection is required for receptacles installed in a kitchen. Rooftops: GFCI protection is required for receptacles installed on rooftops. Outdoors: GFCI protection is required for receptacles installed outdoors.
What is the NEC code for kitchen outlets?
In kitchens, electrical outlets should be placed no farther than 48 inches apart, so that no point on the countertop is more than 24 inches away from a receptacle. Any countertop 12 inches wide or more should have an outlet on the wall behind the countertop.
Where are GFCI outlets required NEC?
The NEC mandates GFCI protection in many areas of the home: bathrooms, garages, outdoor receptacles, crawl spaces, basements, kitchens and anything within six feet of a sink or water source. While that may seem like a lot, the entirety of a home is not covered.
When did GFCI become required in kitchen?
Receptacles in the kitchen were first required to be GFCI-protected by the 1987 edition of the National Electrical Code (NEC), and initially only for counter receptacles within 6 feet of a sink. That was expanded to include all kitchen countertop receptacles with the 1996 NEC.
When did GFCI become required in kitchens?
How far does a GFCI have to be from a kitchen sink?
It must be a GFCI, and it must be within 3 feet of the edge of the sink. Either behind or beside the sink is acceptable — across from the sink on an opposite wall is not. If the bathroom has two sinks, each must have an electrical receptacle within 3 feet.
Can I use 15 amp GFCI in kitchen?
Requirement: All 15 amp and 20 amp outlets, whether GFCI or not, must be tamper-resistant in the following kitchen-related places: small appliance circuit, countertop space, wall, and hallway space. Why: If you have not done electrical work for a few years, you may be surprised by this requirement.
Does dishwasher need GFCI 2020?
Another revision to GFCI protection in the 2020 NEC is to section 422.5(A) dealing with appliances that require GFCI protection. This section was revised to include dishwashers. Yes, dishwashers! Kitchen island receptacle requirements also saw a major overhaul during the 2020 NEC revision cycle.
When did GFCI become code in kitchens?
How many outlets can 1 GFCI protect?
There’s no limit. A standard GFCI will protect up to 20 amps, drawn from any combination of receptacles, either the built-in one or any number of additional ones connected to its load terminals.
When did GFCI requirements start for commercial kitchens?
In addition, I said that the 2017 NEC will contain new GFCI requirements for commercial, industrial and other nondwelling-unit applications. Proposals to require receptacles to be GFCI-protected in commercial kitchens started in the 1986 NEC Report on Proposals (ROP) and Report on Comments (ROC) but were not accepted until the 2002 NEC.
Where do I put a GFCI receptacle in my Kitchen?
Kitchen GFCI receptacles are required by the 2008 NEC (National Electrical Code) to be installed along the countertop surfaces. If you have an older kitchen, and for any reason decided to replace a regular electrical outlet – you should have a GFCI receptacle installed as a replacement.
Why was the NEC code change for GFCI protection?
The reason for the NEC 2020 code change for GFCI protection to include 125V through 250V receptacles (outlets) is because there have been a handful of fatal incidents reported where children were electrocuted by dryer machines and other big appliances in the specified locations utilizing 250V receptacles.
Do you need GFCI protection for kitchen countertop?
It states, “The GFCI protection requirement for kitchen receptacles applies to all 15- and 20A, 125V receptacles, whether or not the receptacle serves countertop areas.”