What is dependent voltage?
A dependent source is a current or voltage source whose value is not fixed (i.e., independent) but rather which depends on some other circuit current or voltage. The general form for the value of a dependent source is Y=kX where X and Y are currents and/or voltages and k is the proportionality factor.
Can we convert dependent current source to voltage source?
3 Answers. The answer is yes. A dependent source is simply one whose current or voltage is not a constant, but a function of some input parameter x. So in the source transformation algebra, you simply regard the quantities V and I not as constants but as V(x) and I(x); in other words V(x)=I(x)R and I(x)=V(x)R.
What is ABM voltage?
ABM (analog behavioral modeling) sources are controlled voltage or current sources. They are much more powerful than linear or polynomial controlled sources because the controlling expression for ABMs is more arbitrary and easier to use.
What is independent and dependent voltage current source?
An independent voltage source maintains a voltage (fixed or varying with time) which is not affected by any other quantity. They are called dependent voltage (current) sources or controlled voltage (current) sources , and their usual symbols are shown in figure 1.4.
Can you add voltage sources in series?
Ideal voltage sources can be connected together in both parallel or series the same as for any circuit element. Series voltages add together while parallel voltages have the same value.
How do you find the voltage of a source?
The voltage across an ideal voltage source is independent of the current flowing through it. An ideal voltage source can be defined by an equation like this: v = V v = \text V v=Vv, equals, start text, V, end text, for example: v = 1.5 V v = 1.5\,\text V v=1.
How are dependent sources depicted in Multisim Figure 1?
Dependent Sources Figure 1 – Dependent sources depicted by Multisim. CCVS = current-controlled voltage source, VCVS = voltage-controlled voltage source, CCCS = current-controlled current source, and VCCS = voltage-controlled current source. To place a dependent source, go to Place > Component and select the Sources group. They are found
Where to find the AC sources in Multisim?
In Multisim we can find the AC sources under Place > Component > Group: Sources > SIGNAL_VOLTAGE_SOURCES. Consider the circuit in Fig. 4. This circuit has a sinusoidal voltage source AC_VOLTAGE, with a 1 V peak amplitude, a frequency of 1 kHz, and a 0 degree phase angle.
What is the Convention of the Multisim guide?
Multisim guides use the convention of an arrow ( ) to indicate the start of procedural information. Multisim guides use the construction CTRL-KEYand ALT-KEYto indicate when you need to hold down the “Ctrl” or “Alt” key on your keyboard and press another key.
Who are the inventors of BSIM3 and BSIM4?
BSIM3 and BSIM4 are developed by the Device Research Group of the Department of Electrical Engineering and Computer Science, University of California, Berkeley and copyrighted by the University of California. Trademarks National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation.