Should you grease your skateboard bearings?

Should you grease your skateboard bearings?

You’ve just cleaned and re-greased your skateboard bearings. Grease is nice because it needs maintenance less often than oil. For greased bearings, try once every month at first or more often if you’re in the wet a lot. Oiled bearings need maintenance every couple weeks if you ride every day.

How often should you lube skateboard bearings?

It is highly recommended to use oil on your bearings after every cleaning, but it is also important to keep an eye out for dry bearings. Skaters should apply lubricant once there are any signs of the bearings drying out.

Should you use WD40 on skateboard bearings?

It’s important to use a silicone-based lubricant. WD40 or others like it will dry out your bearings and attract dust and dirt. It doesn’t take much, and the excess will just spin out when you replace your shields, pop your bearings back in your wheels and start shredding. Skate safe and enjoy your new-found speed.”

Can I use Vaseline to lube my bearings?

When it comes to bearing, only use petroleum jelly for emergency fixes. However, if the metal temperature of the bearing will not get to the melting point of petroleum jelly, Vaseline should work fine. Unfortunately, Vaseline also dries faster, and you have to remove the old one and apply a new layer regularly.

Can I use olive oil on skateboard bearings?

Grease up the bearings A few lubricants that function admirably for skateboard bearings are sewing machine oils, skate bearing grease, or electronic oils. Try not to grease up your bearings using thick oils. Stay away from lubricants such as vegetable oil, olive oil or car oil.

What can I lube my skateboard bearings with?

For 98% of skaters reading this, we recommend a thin bearing grease like Sabre Bearing Lube, Bones Speed Cream, Tri Flow, Sewing Machine Oil, Dry Chain Lube (for bikes) or similar. Synthetic Engine Oil works quite well too…!

Is Vaseline same as grease?

Basically, grease and Vaseline have the same base component. So, Vaseline would work perfectly as a lubricant on your bike. All the same, there is a catch! Petroleum jelly has a low melting point (40-60 degrees Celsius), making it unsuitable for use on components that generate heat.

Can bearings be over greased?

When it comes to regreasing bearings, more is not always the better option and actually can be a costly mistake. Too much grease volume (overgreasing) in a bearing cavity will cause the rotating bearing elements to begin churning the grease, pushing it out of the way, resulting in energy loss and rising temperatures.

Can you use oil and grease to lubricate skateboard bearings?

But all the bearings are made with the same material. So, if you use oil and grease to lubricate the bearings of the truck, you can ‍also use the same material for lubricating the skateboard bearings.

What’s the best way to lubricate a bearings?

Grease Lubrication: Before lubricating the bearing with grease; make sure that whether there is any old grease in the bearings. It should be cleaned if there have any existing grease. Otherwise, it will not be useful if you apply the new grease.

What kind of seals are on skateboard bearings?

There are two kinds of seals that are common on skateboard bearings: rubber seals (pictured) and metal shields. The seals can be popped out from the other side with a small pin or straightened-out staple. Stick your pin between the ball cage and the outside bearing race and press the seal out.

Why do you need bearings on a skateboard?

Bearing plays a major role in keeping the wheel moving. As the bearings lubricate, the wheel rotates faster; in one word the wheel can change its performance. The main purpose of bearing lubricate is to increase the speed of the wheels by reducing the friction ball.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top