How do I log into my axis camera?

How do I log into my axis camera?

It is recommended to use the Setup Axis Camera Tool to configure the Axis Camera. If you need to configure the camera manually, connect the camera directly to the computer, configure your computer to have a static IP of 192.168. 0.5 , then open a web browser and enter 192.168. 0.90 in the address bar and press enter.

What is the default IP for AXIS camera?
The default IP address for the Axis cameras and video encoders is 192.168. 0.90.

How do I reset my AXIS p3245 V?

It is also possible to reset parameters to factory default through the web interface. Go to Settings > System > Maintenance and click Default.

How do I factory reset my axis camera?

Axis Factory Reset

  1. Disconnect the camera from the power supply and ethernet.
  2. Remove the four screws securing the rear cover and remove it.
  3. Keep the Control button pressed while you restore the power supply.
  4. Hold down the button for about 15 seconds until the status LED is yellow flashing.
  5. Release the Control Button.

What is Axis default password?

Axis: Traditionally root/pass, new Axis cameras require password creation during first login (note that root/pass may be used for ONVIF access, but logging into the camera requires root password creation) Basler: admin/admin.

How do I reset my axis camera to factory settings?

What is default password of IP camera?

IP camera default password list

Camera Manufacturer Username Password
HIKVision admin 12345
Honeywell administrator 1234
Honeywell admin 1234
IndigoVision BX/GX Admin 1234

What should be the default password for Axis?

Axis Default Password 1 username: root and password: pass (most commonly used password) 2 username: root and password: root More

What do you need to know about axis p1357?

AXIS P1357 Network Camera Hardware Overview Hardware Overview 1 2 3 4 5 6 7 8 Focus puller Zoom puller Internal microphone LED indicator SD card slot (microSD) Audio in Audio out Network connector PoE Power LED 10 Network LED…

What to do if your axis camera password is lost?

If the password for root is lost, the Axis camera must be reset to the factory default settings (using the reset button). AXIS supports the Real-Time Streaming Protocol (RTSP) for the following camera models. Locate your camera model to find the specific RTSP URL details.

When do I need to update my axis warranty?

Please stay updated on warranty coverage when buying products after their final order date by consulting the Axis 5-year limited hardware policy. For full specifications, check the recommended replacement product datasheet by using the link (s) above.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top