Can you put an Intex pool on a slope?
Intex pools are not meant to be set up on slopes of any degree, as a slope can result in unstable walls that can cause the pool to collapse, potentially causing property damage as well as damage to the pool itself.
How unlevel can an Intex Easy Set pool be?
It’s possible to have your Intex pool unlevel to be two inches off. This won’t cause any structural issues so you can still use your swimming pool. Any more than two inches is unacceptable. Intex pools that are more than two inches off won’t last long and can be too dangerous for you and your family to use.
How do you level the ground for a pool on a slope?
Place stakes or sticks at areas that slope or are off-grade. You’ll need to dig away these area in order to create level ground for the pool. Dig away soil instead of building up low patches. Always dig away slopes and high spots to make them level with lower areas, even if it takes more work.
Can you put a pool in a sloped backyard?
The short answer is yes. By working with professional pool builders and landscapers, you can pursue pool installation even when you’re dealing with a slope. You can use the retaining walls to ensure runoff won’t end up in the pool or even create water features or ledges for sitting and entertaining.
Can you put an above ground pool on a slope?
If you have a hill or sloping backyard, the only way it’s possible to have an above ground pool is to have one specifically designed to be a semi-inground pool. Semi-Inground pools in the most basic description are above ground pools that can withstand the pressure of being buried.
What happens if Intex pool isnt level?
Installing an Intex pool on an uneven surface will cause the walls to collapse due to uneven pressure. The water presses against one section of the pool with more force than the rest and it will be blown out due to uneven weight distribution. Even the most well-constructed pool can fail if the leveling is off.
Will my pool collapse if it is not level?
If an above ground pool is not level, the water’s weight can cause damage to the walls and liner. As a result, your pool will collapse, potentially causing property damage or personal injury.
Can Intex pool collapse if not level?
How do I level my ground for a pool without digging?
A: To level the ground without digging, you will need to use a combination of sand and crushed limestone. Use the crushed limestone to achieve a 1- to 2-inch levelness and then use sand to even out the ground further.
How steep can a pool slope be?
The floor slope shall be a maximum 1 unit vertical in 10 units horizontal and a minimum of 1 unit vertical in 60 units horizontal in areas 5 feet (1524 mm) deep or less. The floor slope shall be a maximum 1 unit vertical in 3 units horizontal in areas more than 5 feet (1524 mm) deep.
How much slope is too much for a pool?
Pool patios, or pool decks as they’re also called, should slope at a rate of approximately one-quarter of an inch per foot. So a section of patio eight feet wide for example, should have around two inches of fall.
Is the Intex pool set easy to assemble?
Make a splash all summer long with the Intex Easy Set, one of the most easy to assemble pools on the market. This pool will make your backyard the place to be all summer as your family can relax and play. Connect the Krystal Clear Cartridge Filter pump to enjoy clean, refreshing water.
What do you need for a pool set?
Includes: Krystal Clear Cartridge Filter pump, 1,000 gph (110-120V). Ladder. Ground Cloth. Debris Cover. SUPER-TOUGH laminated PVC sidewalls. Convenient drain plug that connects to a garden hose so water can be drained away from pool or house area.
Is the Intex pool in danger of collapse?
Yes I would say it is in danger of collapse. I’ve seen recommendations by other posters that up to 2″ out of level is acceptable. My personal pool 16′ x 48″ Intex Ultra Frame is just under an 3/4″ out of level, it was quite a bit of work to get it that close but it is worth it.
Is there a ground fault interrupter for a pool?
Equipped with the Ground Fault Interrupter, which is an added safety feature that shuts off the pump if electrical current is exposed to water. Ready for water in 15 minutes, – simply spread out on level ground, inflate the top ring, fill the pool with water, and enjoy the fun! Water capacity: (80%) 3,736 gallons.