How do I fix the service fuser error on my Lexmark printer?

Power off the printer. Open the left-side access door (Door A), then remove the fuser unit. Check inside the fuser unit for any jammed sheets of paper. If you find paper jammed in the fuser unit, remove the paper, reinstall the fuser, and try printing again.

What is a service fuser error on Lexmark printer?

Issue Description: A Service Fuser message means that the printer has detected some sort of problem with the fuser unit installed on this printer. The fuser unit is the part of the printer that heats up to fuse the toner onto the page.

How do I fix my Lexmark printer?

Quick fix

Make sure that both your computer and your Lexmark printer are connected to your network.
Restart your printer.
Unplug the printer and check if there is any paper stuck in the machine, and if the toner is installed correctly.
Another method is to uninstall and reinstall the printer on your computer.

What is a fuser on a Lexmark printer?

The fuser unit/fuser assembly is the part of the printer that heats up to melt or “fuse” the toner onto the page. The fuser unit is located at the back of the printer, just inside the rear exit door. The fuser unit can be replaced separately or as part of the maintenance kit.

What is a service fuser error?

A Service Fuser message means that the printer has detected some sort of problem with the fuser unit installed on this printer. The fuser unit is the part of the printer that heats up to fuse the toner onto the page. The meaning of the fuser error depends on the error code number associated with it.

How do I fix error 121.71 a service fuser?

Solution: To resolve this issue perform POR (power-on reset) or power the printer Off and power it back On after one minute.

What is service fuser error?

How do I get my Lexmark printer out of error state?

Turn off your Lexmark printer.
Turn on your Lexmark printer and press and hold 2 and 6 simultaneously for at least 15 seconds.
From the Service Mode, scroll down or navigate and select Restore Factory Defaults.
Select Out of Service Erase, then Erase Memory.

How do I reinstall my fuser on my Lexmark printer?

Solution

Power off the printer.
Open the left side cover (also called door A).
Turn the two thumbscrews at each end of the fuser counter-clockwise.
Lift out each of the fuser hooks.
Using the fuser hooks, carefully pull the fuser unit out of the printer.
Remove the new fuser unit from the packaging.

How long does a printer fuser last?

between 50,000 and 200,000 pages
Fusers are designed for fairly long lives compared to toner cartridges, but they don’t usually last forever. Most fusers last between 50,000 and 200,000 pages depending on the design. Little cheap printers tend to have short fuser lives. Fusers used in “workgroup” printers tend to be long lasting and easily replaced.

Why does my Lexmark printer say 924 fuser error?

924 Fuser Error: The printer thinks the wrong fuser unit is installed. The most common cause of this problem is that a 220 Volt fuser is installed in a 110 Volt machine, or vice versa. Be careful not to use a similar-looking fuser unit intended for another printer model in this printer.

What does it mean when Lexmark says 92X service fuser?

Lexmark United States Error: “92x Service Fuser Error” A Service Fuser message means that the printer has detected some sort of problem with the fuser unit installed on this printer. The fuser unit is the part of the printer that heats up to fuse the toner onto the page.

Why does my Lexmark printer say 922 instead of 920?

920, 921, or 922 Fuser Error: The printer thinks the fuser unit is not heating up to the correct operating temperature. This can be due to a bad fuser lamp or possibly no power getting to the fuser unit.

What does it mean when your printer says service fuser?