What size Allen wrench fits a badger InSinkErator?

What size Allen wrench fits a badger InSinkErator?

1/4 inch
Each InSinkErator disposer is shipped with a self-service wrench. The wrench is silver colored, and shaped like a little crank, about four inches long. If you cannot find the service wrench, you can use a standard 1/4 inch Allen wrench.

How do I fix my garbage disposal without an Allen wrench?

Method 1: Press the reset button

1. Unplug the garbage disposal. Don’t skip this step!
2. Push the reset button. You will find this small, red button on the bottom of the garbage disposal unit.
3. Turn on the faucet. The water should be cold.
4. Turn on the garbage disposal. Now you can plug the unit in, and flip on the switch.

What size Allen wrench fits garbage disposal?

1/4-inch
You will need an Allen (hex) wrench to fit the socket on the bottom of the garbage disposal housing. Most disposals come with a little wrench just for this purpose. (It’s probably somewhere at the bottom of your sink base cabinet.) If you don’t have a disposal wrench, you can use a standard 1/4-inch Allen wrench.

Can you use an Allen wrench to fix garbage disposal?

Allen wrench will work. Use the wrench to manually turn the disposal’s motor shaft first counterclockwise, then clockwise until the obstruction is dislodged and the motor shaft spins freely. It’s okay to use some force when turning the wrench, just be sure to support the disposal unit as you do.

How do you unstick a garbage disposal blade?

Insert the hex key (also called an Allen wrench) into the blade access hole at the bottom of the garbage disposal. Turn the hex key back and forth to rotate the blades until you feel the clog break up and the blades move more freely.

What to do if Insinkerator stopped working?

Make sure that the food waste disposer is switched ‘OFF’ at the socket. Gently press the red button in to reset the disposer. If it does not stay in (retracted), wait ten minutes and try again. Turn on a cold stream of water and turn the disposer switch to “ON” position, the disposer should now run again.

Does InSinkErator make the best garbage disposal?

InSinkErator garbage disposal units are some of the best in the world. Made with American-engineering, the quality of these machines is guaranteed impressive . They are also made of galvanized steel, thus assuring the durability of each item. This extends to both the housing and the blades that are responsible for grinding food scraps.

What is the warranty on a Badger 5 garbage disposal?

You can also turn to Insinkerator ‘s official website to contact their customer service department via online form submission or find the nearest authorized service agency. When purchased new, the Badger 5 includes a limited warranty for in-home full service, which covers material- or workmanship-related defects for a two-year period.

How do you reset a badger disposal?

Push the reset button on the bottom of the disposal. If it does not stay in the disposal, turn off the water and wait 10 minutes for the disposal motor to cool. Push the reset button in on the disposal.

How do you fix a badger garbage disposal?

Switch off the disposal and cut off any running water. Insert the self-service wrenchette, included with the Badger 5, into the hole in the center of the disposal’s bottom and work it back and forth until it turns one full revolution — this manually cranks the disposal and frees debris.