Is a tire tread depth of 8 32 GOOD?
Most states and tire manufacturers consider tires to be bald when one or more of their grooves are worn down to 2/32″. So, if you start with a new tire tread depth of 10/32″, the actual usable tread depth is 8/32″. In other words, when a tire’s tread depth is 2/32″, it’s time to get new tires. Don’t wait.
Is 9/32 A good tread depth?
Average new tires used on cars typically start with 10/32″ to 11/32″ of original tread depth. As mentioned above, tires are legally “worn out” In most States when they reach 2/32″ of remaining tread depth. For example, a typical tire that starts with 10/32″ of original tread depth has only 8/32″ of useable tread depth.
How deep should tread depth be?
Good tire tread depth will be 6/32 or deeper. If the depth is 4/32, you should start thinking of replacing your tires and getting new ones. 2/32 or less means that you should change your tires ASAP. The amount of tire tread can affect your stopping distance, making a drive in wet or snowy conditions more dangerous.
How long does it take to wear 1/32 of a tire?
Depending on the tread compound, the tread will wear down about 1/32 inch for every 5,000 to 8,500 miles of normal driving. Consequently, a new set of tires may last 40,000 to 70,000 miles on average.
Is 8.5 32 A good tread?
Used tires tread can be up to 90%, but the average is 6-8/32”. Tires in good condition should have a minimum of 6/32” to be useful, or 4/32” if the tire is 13-14”. The average legal minimum tread depth is 2/32”, but driving becomes unsafe with such a tread.
What is a bad tread depth?
Tire Tread-Depth is the thickness of the rubber remaining on your tire tread. Once your tire tread is below 1/8th of an inch of rubber, most industry experts suggest preparing to replace. If you’re down to 1/16th of an inch, your tires are considered worn out, and most states require immediate replacement.
What is the minimum tread depth for front tires?
2/32-inch
You absolutely must memorize that the front tires (steer tires) need at least 4/32-inch tread depth in every major groove. All other tires (drive tires, trailer tires, etc) must have at least 2/32-inch tread depth in every major groove.
How many miles will 1 mm of tread last?
As a rough guide, a millimeter (1mm) of tyre tread lasts from approximately 1,000 – 4,000 miles dependent upon driving style, road and weather conditions and tyre rubber compound.
How do you measure tread depth?
The best way to measure your tread depth is to stick the probe into the shallowest groove on the tire, press the shoulders of the probe flat against the tread and then read the result. All gauges should measure both in the 1/32″ United States standard and in millimeters.
What is the depth of the tread on new tires?
New tires typically start with a tread depth of 10/32″ to 12/32″, with some off-road tires topping 15/32″. New tire tread depth is the measurement typically published by tire manufacturers, but it’s not the same as usable tire tread depth.
What is the tread depth of a truck tire?
In the United States, tire tread depth is measured in 32nds of an inch. New tires typically come with 10/32” or 11/32” tread depths, and some truck, SUV and winter tires may have deeper tread depths than other models.
What tread depth is low?
There is no national law governing minimum tread depth, but 42 states consider 2/32 inch the minimum legal tread depth. California and Idaho consider 1/32 the minimum, and Arkansas, Montana, New Mexico, North Dakota, South Carolina and West Virginia have no standards on tread depth.