Are SRAM and Shimano cassettes compatible?
Compatibility between different drivetrains SRAM and Shimano cassettes, on either road or mountain bike, are interchangeable with each other as the spacing is the same between the sprockets.
Are Shimano and SRAM 9-speed cassettes compatible?
SRAM’s cassettes and chains are compatible with all of Shimano’s groupsets, and vice versa. Likewise, Shimano and SRAM buyers have the freedom to mix different levels of chains and cassettes so long as they are designed for the same kind of transmission.
Are all 9-speed cassettes compatible?
Up through 9-speeds, all cassettes use very nearly the same width of sprocket teeth, and will work with 7/8 or 9-speed chains. Old Uniglide 6-speed cassettes have larger spacing between sprockets, and like older freewheels, have the same shifting issues.
Can I use a 105 cassette with tiagra?
If you go for Tiagra you can’t upgrade to 105 one component at a time because 10-speed and 11-speed drivetrain components aren’t interchangeable. You’d have to upgrade most of the groupset components at once for optimum performance.
Can you mix Shimano and SRAM?
Most importantly, YOU CANNOT mix Shimano and SRAM hydraulic brake parts. The SRAM rear derailleur (mech) will not work with a Shimano shifter as is; the cable pull and shift activation ratios are not the same between the two systems.
Can I put a 9 speed cassette on a 10 speed hub?
Interestingly, the reverse is not always true; you cannot use a 9 speed cassette on all 10 speed hubs. Shimano’s 10 speed specific hubs are only designed to be compatible with 10 speed cassettes and, as with most computer programs, downward compatibility does not work as well as upward.
Can I fit a 10 speed cassette on a 9 speed hub?
The most you should need to do to allow a 10 speed cassette to work on most 9 speed hubs is install a spacer behind the cassette to make sure the cassette seats tightly. You can put a new 10 or 11 speed cassette on any of the older 9 speed hubs.
Are all Shimano 10 speed cassettes interchangeable?
All Shimano and SRAM cassettes up to 10 speed are broadly compatible. They all use Shimano’s Hyperglide II freehub body spline pattern. Cassettes with the same number of sprockets have the same sprocket spacing, sprocket width and overall width.
Can you upgrade Shimano Tiagra to 105?
Is SRAM as good as Shimano?
In terms of overall performance, they’re very similar. “Shimano’s units feel a bit more powerful overall but the SRAM brakes (above) are a bit more progressive through their range of power, so it’s swings and roundabouts,” said Dave Atkinson. “If I had to choose one or the other, the SRAM brakes would probably edge it.
Are Shimano 9 and 10 speed compatibility?
The rear shift ratio of a Shimano 9-speed derailleur is 1.7. And since the cog pitch of a 10-speed Shimano road cassette is indeed about 3.91mm, one can conclude that a 9-speed Shimano rear derailleur will work with a 10-speed Shimano road shifter. 2. The rear shift ratio of 9-speed Shimano MTB derailleur is 1.7.