How do I fix my Lexmark printer problem?

How do I fix my Lexmark printer problem?

Unplug your Lexmark printer and disconnect the interface cable. Open the Lexmark printer to ensure no paper is caught within the machine. Leave the printer powered down for at least 30 seconds before reconnecting it. Send a print job to the Lexmark to see if the problem is fixed.

Why is my Lexmark not printing?

One of the most common Lexmark printer issues is that the printer is not responding to print requests. Restart your printer. In some cases, a simple restart can fix the issue. Unplug the printer and check if there is any paper stuck in the machine, and if the toner is installed correctly.

Why is my stuff not printing?

First, make sure the printer is on and has paper in the tray. Next, check to make sure the printer cable is properly connected to both the computer and the printer. If you still can’t print, check to make sure the printer is not set to offline mode. Go to Start, Printers and Faxes.

How do I get my Lexmark printer to work?

Firstly, Connect your computer and Lexmark printer to the same wireless network. Now click on the ‘Start’ button and then go to the control panel and adjust the computer settings. Select ‘Add a new Device’ in the Hardware category. Make sure that your Lexmark printer is ON and discoverable mode.

What causes the printer to print blank pages?

There are numerous possible causes for a printer that’s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.

How do I clear my printer’s memory?

Click “See What’s Printing.” Open the “Printer” menu, pick “Cancel All Documents” and choose “Yes.” The list should clear within a few seconds. If one or more print jobs remain on the list, reboot your computer to clear out the memory.

How do I restart my printer?

It’s a pretty simple process:

1. With the printer turned on, pull out the power cable from the back of the printer.
2. Unplug the power cable from the wall outlet.
3. Wait 15 seconds.
4. Plug the power cable into the back of the printer.
5. Plug the printer back into the wall outlet.
6. Turn the printer back on.
7. Run a test print.

Are there any problems with the Lexmark printer?

While generally reliable, your Lexmark printer is prone to the occasional problem. These problems can include empty paper trays, low toner and print cartridge errors.

How to reset the ink counter on a Lexmark printer?

Open the Lexmark Solution Center program on your computer. Click “Maintenance,” and select “Install or obtain a new cartridge.” This will reset the ink counter on your printer. After you get a ready message, try to print again.

How do I get a new Lexmark printer cartridge?

Open the Lexmark Solution Center program on your computer. Click “Maintenance,” and select “Install or obtain a new cartridge.” This will reset the ink counter on your printer.

Can a Lexmark printer work on Windows 10 Mobile?

Windows 10 Mobile is currently not supported by Lexmark printers, click here for additional information on product details and limitation for each printer. First-time installation of network or USB-connected printer.