Do you check Harley transmission fluid on kickstand?
The transmission oil is checked with the motorcycle on a level surface and on the kickstand. The transmission oil level is correct when between the Add and Full marks on the dipstick.
What kind of transmission fluid do you put in a Harley-Davidson?
What kind of transmission fluid does a Harley Davidson take?
| AMSOIL Recommendations for Harley-Davidson Motorcycles | ||
|---|---|---|
| Flathead | Best | Secondary |
| Transmission | 20W-50 | MVT Synthetic V-Twin Transmission Fluid |
| Primary Chain Case | 20W-50 | MVP Synthetic V-Twin Primary Fluid |
| Ironhead – Evolution Sportsters / V-Rods | Best | Secondary |
Can I use gear oil in my Harley transmission?
Our answer: It is perfectly acceptable to use 75W-140 gear oil in Harley-Davidson transmissions. For instance, AMSOIL V-Twin Synthetic Transmission Oil is an SAE 110 gear oil.
How much oil goes in a Harley transmission?
The transmission fluid capacity is approximately 24 ounces (0.71 liters). Inspect o-ring for tears or damage. Replace if required. Wipe any foreign material from plug.
Do you check motorcycle oil on kickstand?
You can’t get a good reading if your bike’s on its kickstand, so grab a buddy to hold it up for you, invest in a stand or apply the brakes while gently balancing it on its wheels. This isn’t a job for a hot bike. Your dipstick and sight glass are designed for cool oil, which doesn’t have the same viscosity as hot oil.
What kind of fluid goes in a Harley primary?
You actually have a couple of choices for the primary drive. The optimum product would be Mobil 1 Racing™ 4T 10W-40 motorcycle oil, but it is also okay to use Mobil 1™ V-Twin 20W-50.
Can you use 75w90 in Harley transmission?
It’s a synthetic gear oil. It will be just fine in the trans. I would recommend using gear oil in there over motor oil.
What happens if you overfill Harley transmission?
Overfilling the transmission fluid will not cause seals to break, but they may leak. The transmission is vented so that pressure won’t build in the unpressurized areas. The seals higher in the transmission may also leak, but these seals are not pressurized.
Should I check my motorcycle oil hot or cold?
You should check engine oil when the engine is warm because a warm engine indicates that it has been running for a while – allowing the engine oil to fully circulate around and give you a more accurate reading. It’s also important to allow the engine to stop for a minute before you perform the engine oil check.
What kind of transmission fluid does a Harley Davidson use?
Although Harley Davidson suggests using genuine Harley Davidson Formula+ Transmission and Primary Chaincase Lubricant (part number 99851-05), many owners use gear oil such as 75w-90 with success. Some even use automatic transmission fluid. What fluid works best for you depends on factors like transmission wear, type of riding, and climate.
How much fluid do you put in a transmission?
Place a funnel into the fill plug hole and pour 22 oz. (650 milliliters) or 32 oz. (946 milliliters) of fluid into the transmission (differs by year). Different year models use different methods to check the fluid level. Some years need to be checked with the bike level while others need to be checked on the kickstand.
Can you change transmission fluid in a Softail?
Aside from properly shifting gears, keeping fresh transmission fluid installed in your Softail is the best way to keep your transmission problem-free. The process is fairly simple and may save you hundreds when you do it yourself! This article applies to the Harley Davidson Softail.
Why do you need to change transmission fluid?
Metal shavings collect in the fluid over time as mileage increases. These shavings mix with the fluid and reduce the fluid’s ability to lessen friction between surfaces. Overheated transmission fluid from racing or engine overheating damages the fluid, making replacement mandatory.