What is a horizontal fuel conditioning module?
The Horizontal Fuel Conditioning Module (HFCM) is a part of the complex Ford 6.0L Power Stroke Engine. To help provide that quality, the HFCM filters out water and other contaminants before the fuel is delivered to the injectors.
Where is the HFCM?
The HFCM is mounted to the driver’s side frame rail, and pumps fuel from the tank to the 4-micron secondary fuel filter that’s mounted atop the engine beside the oil filter assembly.
Where is the HFCM on a 6.0 PowerStroke?
Locate the HFCM on the driver side frame rail between the engine and fuel tank.
What is truck HFCM?
The HFCM contains the fuel pump.
How does the fuel system work on a 6.0 PowerStroke?
The 6.0 Powerstroke engine, like the 7.3 its predecessor, uses Hydraulic Electronic Unit Diesel Injectors (HEUI), which receive energy to open from engine lube oil that’s pressurized by a gear-driven high-pressure pump.
Does a 6.0 PowerStroke have a lift pump?
A lift pump, as it’s commonly called on a modern diesel, is not the main injection pump. The CP3—the main, high-pressure injection pump—takes this low-pressure supply and ramps it up to a maximum of 26,000 psi (again, on stock trucks). …
What does the HFCM do?
What does HFCM stand for? Horizontal Fuel Conditioning Module. It funtions as one of two filters to separate water and other contaminants from your fuel.
How do you bleed air out of fuel system on 6.0 Powerstroke?
per ft.). To prime the fuel system and bleed out any air, turn the ignition to the Run position three separate times—for 30 seconds each time.
How do you know if your fuel pump is bad on a 6.0 Powerstroke?
Squeaks, squeals and other high-pitched sounds: If your vehicle starts squealing or making unusual, high-pitched noises, this could be a sign that your diesel fuel pump is going bad. Different pumps naturally make different sounds, but over time you should be able to adjust to these noises while you drive.