Does code require a fireplace hearth?
For a fireplace with a larger opening of more than 6 square feet, the ICC requires a hearth that extends 20 inches or more in front and 12 inches or more along the sides. The hearth design must be at least 2 inches thick.
How far does a fireplace hearth have to be?
To keep fire, ashes and embers a safe distance from the floor in front of a fireplace that has an opening 6 square feet or smaller, the hearth should extend at least 16 inches in front of the fireplace opening. The hearth also needs to extend 8 inches to each side of the opening.
What is the minimum depth of a fireplace hearth?
4 inches
The minimum thickness of fireplace hearths shall be 4 inches (102 mm).
How big should a hearth be Australia?
The size of your hearth needs to be directly proportionate to the size of your heater. Fireplaces require a minimum flue height of 4.6m, measured above the floor where the fireplace will be installed.
Do you have to have tile in front of fireplace?
An apron of marble or granite tile directly in front of your fireplace is common, but not necessary. Gas fireplaces will not damage flooring or other materials that are in close proximity, like a wood-burning fireplace would.
Does a hearth have to be raised?
If you have any solid fuel burning stove, it is absolutely vital that you have the correct hearth for it to sit on. For this reason, regulations also state your hearth should be ‘visually apparent’, with the edge ideally raised above the level of the floor.
Do I have to put tile in front of fireplace?
What depth should a hearth be?
A hearth must extend a minimum of 300mm (12 inches) in front of the fire or stove and 150 mm (6 inches) to the side of the fire or stove (see diagram 4). Under some circumstances the minimum depth of a hearth plate is 12mm (see below).
Is there a minimum hearth size?
How big should a hearth be?
The hearth must extend at least 300mm to the front and 150mm to either side. It must be at least 12mm thick. It must be made from non-combustible materials. It must also cover a minimum area of 840 x 840mm.
How much clearance do you need around a fireplace?
The National Fire Code dictates that any combustible material (e.g., wood mantel or similar trim) must be at least six inches from the firebox opening. An additional inch of clearance is needed for every 1/8 inch the combustible material or trim protrudes.
What are the regulations for a fireplace in Australia?
Fireplaces are also regulated by an Australian Standard (AS/NAS 2918), which means there are several restrictions that can impact how and where it is built. Check local building regulations before installing the appliance. It is recommended to get installation by a professional Wood Heater Distance From Wall in Australia
How can I check if my wood heater complies with Australian standards?
Check your heater has a compliance plate stating it conforms to the Australian Standard for pollution emissions (AS/NZS 4013:2014) and efficiency (AS/NZS 4012:2014). If it doesn’t you might consider upgrading your heater to a newer more efficient model. Contact your local council to check on local regulations before installing a wood heater.
What are the regulations for a wood heater?
For example, every wood heater made since 1992 must comply with AS/NZS 4013 to ensure smoke emissions are within a reasonable and safe limit. The installation of wood heaters, however, is regulated by Australian Standard AS/NZS 2918.
Is it safe to use open flame heater in Australia?
The use of open flame heaters in a home is tightly regulated, and requires compliance with a lot of Australian Standards to ensure your safety. For example, every wood heater made since 1992 must comply with AS/NZS 4013 to ensure smoke emissions are within a reasonable and safe limit.