How do I set up an optical network terminal?
Connect the fibre optic cable from port 1 of the FTP to the Passive Optical Network (PON) port located at the back of the Optical Network Terminal (ONT). Connect Wireless Router to power and switch on. Wait for Power and Internet lights to turn green.
How do I connect my ONT to my modem?
To do this, get a network cable (also known as an Ethernet / LAN cable) and connect your computer to the ONT, plugging it into the ONT’s active port 1 (the one supplying your MyRepublic broadband).
How do I reset my Singtel optical network terminal?
Step 1 Turn the power of your Optical Network Terminal (ONT) and router off. After 5 minutes, turn on the power of your ONT and router. Step 2 Shut down your computer and start up again after 5 minutes.
What is Singtel optical network router username and password?
admin
Step 1: Connect your PC to the ONR through the Ethernet port. Step 2: Enter http://192.168.1.254 in the address bar of your Internet Browser and press Enter. When the login window is displayed, enter username (admin by default) and password (printed on the nameplate of the device).
How does optical network terminal work?
How does an ONT work? The ONT converts fiber network signals from light into copper and electric (Ethernet wiring) for your router to use. The ONT communicates with your provider’s fiber network at the Termination Point, or TP, installed by your provider using an optical fiber cable.
Can I connect directly to the ONT?
Yes, you can plug a computer directly into an ONT. Note that if service is active, the computer will get a public IP address and be fully exposed to the Internet.
How do I access my Singtel optical router?
Step 1: Connect your PC to the ONR through the Ethernet port. Step 2: Enter http://192.168.1.254 in the address bar of your Internet Browser and press Enter. When the login window is displayed, enter username (admin by default) and password (printed on the nameplate of the device). Step 3: Click Login.
How do I connect my ONT box?
Using another Ethernet cable, plug one end into any of the LAN ports on your router. Take the other end of the cable and plug this directly into your device. Take one end of an Ethernet Cable and plug this in to the LAN port of your ONT. the cable and connect this to the WAN port on your router.
How do I connect ONT?
Using another Ethernet cable, plug one end into any of the LAN ports on your router. Take the other end of the cable and plug this directly into your device. Take one end of an Ethernet Cable and plug this in to the LAN port of your ONT. Use the other end of the cable and connect this to the WAN port on your router.
How to Reboot Your optical network terminal ( ONT )?
Please follow these steps below on how to reboot your ONT and router. Step 1 Turn off the power of your Optical Network Terminal (ONT). Step 2 Turn off the power of your router. Step 3 Turn on the power of your ONT. It will take about 2 minutes to boot up. Check that the POWER and PON LED lights are in green colour and are stable.
What kind of cable do I need for SingTel FTP?
Connecting the FTP to ONT using a fibre optic cable*, as well as wiring (Cat5e) from your router to the first Singtel TV set-top Box. *The core of the fibre optic cable is fragile because it is made from glass, hence requiring care. Do not touch its tip.
Do you need a third party MoDem for Singtel TV?
If you have upgraded from Fibre Entertainment Bundle (with Singtel TV) to Unlimited Fibre, connect your third party modem to ONT LAN 2 instead. Configure your third party modem according to your device’ manual.
How to change Wifi channel on Singtel router?
Step 4: Change to the recommended WiFi Channel at your respective Singtel router. Steps to change WiFi Channel of your Singtel router: (AZTECH 8900) Step A Go to http://192.168.1.254 to visit the AZTECH configuration page. Step B At the AZTECH configuration page, scroll down and click on “Wireless Settings”.