Is 1176 good for bass?
Getting Some Grit for Bass and Vocals with Compression Distortion. It can add a very useful, gritty compression effect. This setting is especially useful on bass, where compression and distortion might be needed at the same time, and the 1176 can provide both in a unique way.
Is la2a good for bass?
This is the best compressor ever IMO. It makes things just sound better hence some using it with no compression just for the sound. Vocals, bass, guitar, drums can all be done with these.
How does an 1176 work?
How It Works. The 1176 is a “feedback” compressor. The signal goes through the input stage, via the line input transformer, which has a big impact on the sound. From there, the signal is routed to the top of a FET, which is being used as a variable voltage resistor.
How much does it cost to compress a bass guitar?
To compress a bass guitar, set the attack to 25ms, the ratio to 4:1, and the makeup gain to +2 or +3dB. Drop the threshold to between -15dB and -25dB, or to the point where the compressor starts to increase the total volume while decreasing the difference between the loudest and quietest parts.
How do you compress a bass sound?
To start off, set your ratio between 3:1 – 4:1. Then, set your attack very slow (100ms) and your release very fast (25ms). Finally, decrease the threshold until you are getting 5-10dB’s of compression.
What is LA-2A good for?
The UREI-built Silver LA-2A is generally appreciated for its faster time constant and its treatment of transients. This makes it a versatile performer that’s suitable for the widest variety of applications — including drums, percussion, and bass guitar.
How do you play 1176 on guitar?
Begin by pulling back the Output (it can get loud!) and then crank the Input up past the 3 O’clock position. 1176 Guitar Cruncher. With a 4:1 ratio on the Ratio buttons, and the Attack and Release set to fast (fully clockwise), the unit will deliver a meaty guitar tone.
What happened in the year 1176?
Europe. May 29 – Battle of Legnano: The Imperial army (some 5,500 men) led by Emperor Frederick I (Barbarossa) is defeated by forces of the Lombard League, leading to the pactum Anagnium (the Agreement of Anagni).
Is 1176 a compressor or limiter?
The 1176 Peak Limiter is a dynamic range compressor designed by Bill Putnam and introduced by UREI in 1967. Derived from the 175 and 176 tube compressors, it marked the transition from vacuum tubes to solid-state technology.
What’s the ratio on the 1176 Classic limiter?
The four Ratio buttons on the left of the meter are used to set the degree of compression — lower ratios (4:1, 8:1) for compression, higher ratios (12:1, 20:1) for limiting. And, exclusive to the 1176AE, there’s an even lower, 2:1 ratio — for a smooth, soft-knee compression that’s perfect for vocals.
Can a 1176 AMP add color without compression?
Add color without compression by simply running through the 1176’s input and output amplifiers. This effect can be particularly useful on direct-recorded guitar tracks, or anything that might benefit from the unique character and distortion of the 1176’s input and output amplifiers.
What’s the best setting for the 1176 plug in?
For a solid starting point with the 1176 plug-ins, try the classic “Dr. Pepper” setting. The name comes from a classic ad campaign for Dr. Pepper that recommended people drink a bottle for a needed sugar boost at 10 o’clock, 2 o’clock, and 4 o’clock, everyday. Mimicking these numbers on an 1176 will often yield great results.
Where are the ratio buttons on a 1176?
Ratio buttons set the compression, Meter buttons set the meter display. Eight control switches surround the VU meter of all 1176s. The four Ratio buttons on the left of the meter are used to set the degree of compression — lower ratios (4:1, 8:1) for compression, higher ratios (12:1, 20:1) for limiting.