What is the longest curtain rod you can get?

What is the longest curtain rod you can get?

How Long Is the Longest Curtain Rod? The longest curtain rods readily available are 120″-170″ long; however, if you need longer rods, it’s pretty easy to DIY them. You can make your rods as long as 240″.

What size do curtain tension rods come in?

Come in four sizes: 18″-30″, 30″-52″, 52″-90″ and 90″-120″.

How long can you get tension rods?

The length of tension rods usually doesn’t exceed longer than 84 inches.

Can tension rods hold heavy curtains?

Curtains to Use on Tension Rods Since they are not as strong as other rods, they cannot support heavy curtains, according to LoveToKnow. You may be able to hang heavier curtains, but they could collapse, and this could damage the walls or even result in injury.

How wide can a curtain rod be without support?

For 1 3/8 Inch Diameter Wood Poles: Two curtain rod brackets are sufficient up to a width of 60 inches (5 feet). Having said that, a 2 inch or 3-inch diameter pole can span a distance up to a full 12-feet without flexing or bowing using only two end brackets.

How do you measure a tension rod?

The tension rod lengths are measured under the collar. It is usually done that way. The bolts are measured the same way. The measurement doesn’t usually include the tension bolt head.

Can you use a shower tension rod for curtains?

1. Window Treatment. We’ll start with the most obvious, which is using a shower rod as a window treatment. You don’t have to use it just as a make-shift curtain rod, although they are perfect for hanging or laying curtains when you don’t want to make holes in your walls or windows.

Can you make a tension rod longer?

Locate the point where the two sections of the tension rod fit together. Tension rods have two interlocking shafts with a strong spring inside. Place one hand on either side of the spot where the rods connect and twist counterclockwise to lengthen the tension rod or clockwise to shorten it.

How do I keep my curtain rod from sagging in the middle?

How to Fix a Sagging Curtain Rod

1. 1 – Move Your Support Brackets.
2. 2 – Add Additional Support Brackets.
3. 3 – Insert a Support Rod.
4. 4 – Use a Lighter Fabric.
5. 5 – Shorten the Curtain.
6. 6 – Protect the Curtain with a Barrier.
7. 7 – Purchase a Heavier Duty Curtain Rod.
8. 8 – Replace the Support Brackets.

How far should curtain rods stick out from wall?

General Installation Recommendations. When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side. This allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.

What is a tension curtain rod?

A tension rod is a type of adjustable rod made with springs on the inside and generally a plastic or metal circular bar on the outside. It is used both as a curtain rod and as a shower curtain rod. This type of rod does not require any hardware to install, is generally adjustable within a small margin,…

What is a spring tension rod?

Tension rods, also called spring rods, are curtain hardware which allow you to hang window curtains, wall curtains or shower curtains without installing curtain rod hardware on the walls. If an existing tension rod slips or if you want to change the curtain panels or add curtain rings,…

What is a pressure rod?

Spring pressure rods are sometimes called tension or spring tension. The terms are interchangeable and mean that the rod expands within the open space and is held in place by internal pressure. Without brackets and supports, the amount of pressure created by the internal spring is responsible for holding the weight of both the rod and your fabric.