How many CFM is a Edelbrock 1411?
750 CFM
The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day.
What size is a Edelbrock 1411?
12.9 x 10.7 x 6.6 inches
Technical Details
| Manufacturer | Edelbrock |
|---|---|
| Product Dimensions | 12.9 x 10.7 x 6.6 inches |
| Country of Origin | USA |
| Item model number | 1411 |
| Is Discontinued By Manufacturer | No |
What does AVS2 stand for?
air valve secondary
This creates much finer fuel droplets that burn more efficiently. Currently, Edelbrock is offering three different size carburetors in the AVS2 line with a 500-, 650-, and a large 800-cfm version. AVS stands for air valve secondary, which describes the spring-loaded air-valve door.
Are Holley carbs better than Edelbrock?
As I mentioned before, right out of the box an Edelbrock will be better. However, if you’re a DIY guy who likes modding things around – Holley will be your best pal. The tuning is more responsive and less touchy than not only Edelbrock, but most other manufacturer’s carbs.
How do I know what kind of carburetor I have?
Look at the upper front of the carburetor on the piece known as the airhorn, or choke tower. This is a rectangular part of the carburetor with rounded edges, open to the top of the part. There will be a small number stamped there.
What do the numbers mean on Edelbrock carburetor?
1st set of numbers tell you what size the carb is from a chart on the edelbrock website. the 2nd set refers to date the carb was made. So, 1406 1656 was 1406= 600 CFM. the first three numbers of the next set is the day of the year. the last number of the 2nd set is the year.
How do Edelbrock secondaries work?
The Edelbrock’s secondaries are mechancally operated, with the air valve above allowing only the amount of extra flow that the engine needs. Have someone push the throttle slowly to the floor, while you watch the throttle linkage. You should be able to watch the the levers open both the primaries and the secondaries.
What cfm carb do I need for a 350?
A 600-cfm carburetor may perform quite well on a stock 350 Chevy. However, the minute you start weaving in power adders like a hotter cam, a dual-plane performance intake manifold, and aluminum heads you’re going to need 700-750 cfm.
Does the Edelbrock AVS2 have vacuum secondaries?
The Edelbrock AVS2 #1905 includes both timed and full vacuum ports for ignition advance. It comes with: . 101 primary and. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design.
What kind of carburetor does Edelbrock 1411 have?
This single-inlet Edelbrock 1411 carburetor features a silver finish and uses easily changed metering rods for precise tuning, non-adjustable secondary air valves, and the primary venturi booster is a bottom-feed design for smoother acceleration and better drivability. Is this carburetor mechanical? Thank you for your question.
Do you need a tuning DVD for an Edelbrock carb?
Installation & tuning DVD included with every new carb. Change jets, replace needles/seats and adjust floats on any Edelbrock carburetor without having to drain the fuel from the bowls or remove the carb from the manifold.
Is there a fuel filter inside the Edelbrock carburetor?
Is there a fuel filter inside the Edelbrock carburetor? There is no fuel filter inside the Edelbrock Performer/Thunder series carburetors. Screens are installed into the needle and seat assembly, but this is not a fuel filter, the screens are used to trap large pieces of debris.
What kind of torque converter do I need for Edelbrock performer?
With an Edelbrock Performer RPM camshaft a 2,500 stall speed torque converter is recommended. Any torque converters with a stall range from 2,200 to 2,800 rpm would be acceptable. I want to run an RPM cam do my stock heads need to be modified to run this cam?