How much horsepower does a Honda 350x have?
Engine displacement is 350.4 cm3 (21.38 in3) delivered by a 31-mm dual-valve Keihin carburetor. The ATC’s engine configuration lends to its 60 – 65 mph (97 – 105 km/h) top speed, horsepower of 26.6 hp/27 PS @ 7,000 RPM, and maximum torque of 29.4 Nm (3.0 kg-m, 21.7 ft-lb) @ 6,000 RPM.
How much is a 1986 Honda 350x worth?
Values
| Excellent | $2,485 |
| Very Good | $1,395 |
| Good | $745 |
| Fair | $360 |
| Poor | N/A |
How much is a 1985 Honda 350x worth?
How many gears does a Honda 350x have?
350x is a 6 speed.
What’s faster 250R vs 350x?
Completely different animals. The R has much faster acceleration and probably 7-10mph faster top speed. It’s lighter than a 350x by at least 30 pounds. The R has WAY better suspension.
Did Honda make a 350 Big Red?
There were three generations of Honda Big Red three-wheelers produced, all targeted towards consumers who needed a reliable machine and sports racers who were looking for a better suspension and engine displacement. People often compared The ATC 250R with the Honda Big Red 350 or Honda ATC350X.
How fast does a 1985 Honda 350X go?
A stock 350X will absolutly do 72 mph.
When did the Honda 350X ATC come out?
Introduced in 1985, the Honda 350X launched during the height of the ATC craze, alongside other revolutionary machines – and had a lot of promise. Honda engineers had racing in mind during the design process of the trike. However, it turned out to be more of a sport machine than a racer.
What are the dimensions of a 1985 Honda 350X?
Overall vehicle dimensions of the 1985 Honda 350X are 74.4 x 43.9 x 42.6 inches (1,890 x 1,115 x 1,082 mm – L x W x H). The length and width were retained the following year, but the Honda ATC’s height was reduced by less than an inch (42.3 inches, 1,075 mm).
How much horsepower does a 1985 ATC200X have?
1985 ATC200X Specifications Horsepower 18 PS (17.8 hp) Torque 1.7 kg/m 3 (12.3 ft-lb) Starter Type Kick Fuel Type Gasoline
What kind of tubing does a Honda 350X use?
The Honda ATC 350X frame comprises mild steel tubing that is ¾ inch thick (versus the ATC250R’s tubing, which measures 1 1/8 inches). Because of this, the chassis is unsuitable for MX tracks in stock form and would need to be beefed up for racing applications.