How do I download Viewsonic drivers?

How do I download Viewsonic drivers?

Installing Display Drivers

1. Enter the Product Name.
2. Select the driver based on the operating system of your computer.
3. Click on Open to start the installation.
4. Note: The downloaded file is a zipped file.
5. Once you have decompressed (unzipped) the file, double click on it and follow the prompts that appear on your screen.

How do I fix my Viewsonic monitor?

Troubleshooting Common Problems

1. Make sure you have turned on the monitor by pressing the Power button.
2. Make sure the power cord is properly and securely connected to the monitor and power outlet.
3. Plug another electrical device into the power outlet to verify that the outlet is supplying power.

How do I install a display driver?

To Install the NVIDIA Display Driver:

1. Run the NVIDIA Display Driver installer. The Display Driver Installer appears.
2. Follow installer directions until final screen. Do not reboot.
3. When prompted, select No, I will restart my computer later.
4. Click Finish.

Why is my ViewSonic monitor not working?

The wire connection might just be loose, which is why the monitor doesn’t display anything. In addition, make sure that the monitor is plugged to a wall outlet and is receiving power. While you’re at it, you can try switching out the DVI or HDMI cable because the problem might be due to a bad cable.

How do I reset my ViewSonic monitor?

Button Shortcut

1. Press the power button on your ViewSonic monitor to turn off the power.
2. Locate the plus or up button on the monitor.
3. Press and hold the plus or up button and the power button simultaneously. Continue pressing both buttons until an on-screen message reading “All reset” appears.
4. Release both buttons.

How do I update ViewSonic M1 firmware?

How to Upgrade the M1+ Firmware? Print

1. Go to “Downloads” -> ”Driver & Software” by searching M1+ from ViewSonic website to download “M1+ Firmware Update v2.
2. Unzip the downloaded files and copy the Firmware files, “MstarUpgrade.
3. Power on the projector.
4. Plug in the USB drive with the new Firmware (from Step 2).

How do you update monitor firmware?

How to update my monitor’s firmware? Print

1. Click on the Advanced sub-menu, then Information.
2. Connect the USB cable between your computer and monitor.
3. Connect your PC/laptop to internet, then click Update and wait until the upgrade process completes.

How do I connect my ViewSonic monitor to my computer?

Connect one end of a DisplayPort/USB Type-C cable to the DisplayPort/USB Type-C Out port of your computer. Then connect the other end of the cable to the DisplayPort In/USB Type-C port of the monitor. Use another DisplayPort cable to connect to the DisplayPort Out port of the first monitor.