Do they make pressure treated tongue and groove?
Pressure treated southern yellow pine tongue and groove decking with a lifetime limited warranty.
How long will 5 4 deck boards last?
Longevity of 5/4 decking Treated decking will last as long as its cared for, or close to it. “Wooden decks have a life expectancy of 20 years according to Citi Bank and the National Home Builders Association (NHBA).
What is the difference between standard and premium pressure treated wood?
Premium – Highest grade for ¾ radius edge decking. Standard – Mid-range grade for 5/4 decking. Number 2 – Grain slope must meet minimum 1/8 grain slope. Boards will contain no splits larger than 1.5 times width of board.
What lengths do 5 4 boards come in?
What is this? The nominal dimensions of lumber are commonly based on the rough cut size before being planed smooth on all four faces….Deck Board Sizes and Actual Dimensions.
| Common Deck Board Sizes | |
|---|---|
| Nominal Dimensions | Actual Dimensions |
| 5/4 x 6 | 1 x 5½” |
| 2 x 4 | 1½” x 3½” |
| 2 x 6 | 1½” x 5½” |
What is #1 pressure treated lumber?
Premium Grade The lumber has the structural strength it is graded with but has fewer blemishes or knots, so a better appearance. Premium is usually #1 or #2 grade lumber. What is this? The clear appearance makes it a choice for trim, furniture, and cabinetry.
What is pressure treated tongue and groove?
Tongue and groove is pressure treated for longer life. We use (TGV) v-joint tongue and groove which provides an elegant finish to your project. T&g is often used to clad timber buildings and gates but can be used for a variety of projects.
Can you use 5 4 deck boards?
The extra material of 2×6 boards increases the distance it can span between joists. A 12′ (3.6m) wide deck using 5/4 deck requires ten joists for 16″ on centre spacing. The same width deck using 2×6 decking, with the larger 24″ (600mm) spacing will only require seven joists.
How long will pressure treated lumber last?
40 years
How Long Does Pressure-Treated Wood Last? It depends on the climate, the type of wood, its uses, and how well it’s maintained. While pressure treated poles can stay up to 40 years without any signs of rot or decay, decks and flooring might only last around 10 years.
What is the best pressure treated wood to use for a deck?
Pressure treated wood is often the most economical option available for outdoor decks. There are a few different types of wood that are commonly pressure treated for decks, but the two most popular are southern yellow pine and douglas fir.
What is the thickness of 5/4 decking?
Comparing 5/4 Decking With 2×6 Deck Boards, Pros and Cons
| 2×6 Deck Boards | 5/4 Decking | |
|---|---|---|
| Thickness | 1 ½” (38mm) | 1″ (25mm) |
| Joist Spanning | 24″ (600mm) | 16″ (400mm) |
| Weight | 2.36 lbs (1.07kg) lnft* | 1.59 lbs (0.72 kg) lnft* |
| Profile cut | Square Cut | Rounded Radius Edge |
Why is it called 5 4 board?
Quarters refer to the thickness of rough-sawn lumber measured in ¼-inch increments. Instead of reading it as a fraction, it should be read as a number of quarters: 5/4 is five quarters, 4/4 is four quarters, etc.