What is the tensile strength of 4140 Prehard?
153 KSI
4140 HT Oil Quenched & Tempered: Typical Tensile Strength: 153 KSI.
What is the shear strength of 4140 steel?
approximately 63%
4140 in the annealed condition has a machinability rating of 66% of AISI B-1112. Average surface cutting speed is 110 feet per minute. The ultimate shear strength is approximately 63% of the ultimate tensile strength.
What is the hardness of 4140 Prehard?
HRC 28/32
4140 Chromium-Molybdenum Steel 4140 PREHARD is heat treated to a medium hardness (HRC 28/32) and is designated as 4140 HT. 4140 annealed is supplied in the soft condition and can be hardened to RC 40.
Can you machine hardened 4140?
4140 responds readily to heat treatment and is comparatively easy to machine in the heat-treated condition. 4140 resists creep in temperatures up to 1000 degrees Fahrenheit and maintains its properties even after long exposure at these high working temperatures. The chromium content provides good hardness penetration.
Is there a maximum hardness level for 4140?
The maximum hardness that can be obtained in any steel depends on carbon content. The section size in which maximum hardness can be obtained depends on alloy content. 4140 has a nominal carbon content of .4% and this carbon content will yield a hardness of Rc 51 for a 90% martensitic structure (9th Edition of the ASM Material Handbook,Volume I).
What is the difference between 4140 4340 material?
TVP (Materials) 9 Jul 02 11:54 There is a huge difference between these two alloys chemically, namely the nickel content: 4140 nominally has no Ni and 4340 contains between 1.65 and 2.00 % Ni. This contributes to substantial differences in hardenability and fracture toughness, and also has a positive effect on distortion during quenching and corrosion resistance.
What is the hardness of 4140 steel?
4140 Heat Treated is a chromium-molybendium alloy steel. 4140 HT is the most commonly used high tensile steel with endless applications including everything from gears and pumps to various applications in the automotive and construction industry. 4140 HT has a medium hardness of 28/32 HRC.
What are the types of steel 4140?
AISI 4140 Alloy Steel (UNS G41400) Alloy steels are designated by AISI four-digit numbers and comprise different kinds of steels, each with a composition which exceeds the limitations of B, C, Mn, Mo, Ni, Si, Cr, and Va set for carbon steels. AISI 4140 alloy steel is a chromium-, molybdenum-, and manganese-containing low alloy steel.