What is a panel mounted switch?
Typically designed to sit off of a PCB and used in a variety of industries, Panel Mount switches range from miniature and sub-miniature slides, push buttons of all sizes, rockers, toggles and snap-action switches.
What does Panel Mount mean?
Panel Mount is a mechanical feature or features built into the design of a connector half. It allows the connector to be secured to an equipment panel, external case or enclosure. Often (but not always), connectors fitted with panel mount features will be cable connectors.
What is momentary switch?
Momentary switches require continuous compression. They will switch on when the user compresses the switch and will remain on only for as long as there is pressure on the switch. Once the pressure is removed they will switch off. For example; a door buzzer or an electric drill.
What does SPST switch mean?
Single Pole Single Throw
A Single Pole Single Throw (SPST) switch is a switch that only has a single input and can connect only to one output. This means it only has one input terminal and only one output terminal. A Single Pole Single Throw switch serves in circuits as on-off switches. When the switch is closed, the circuit is on.
What is a panel receptacle?
A panel mount receptacle enables you to plug connectors directly into a device wall or free-hanging connector for in-the-field assembly. The process involves cutting a hole in the surface of the electrical device and placing the receptacle through or against the hole.
What is a panel mount breaker?
These miniature circuit breakers interrupt current overloads and mount on the front panel of equipment. They’re typically used with simple systems that don’t have separate electrical panels or enclosures, like power supplies, medical equipment, control panels, and telecommunications equipment.
What is a ganged switch?
1 : a set of two or more switches in as many circuits operated simultaneously by a single control.
What kind of switch can be mounted on a panel?
Panel mount switches can be found on many types of applications including industrial, kiosks and more. 300A Series Sealed, Miniature Rocker and Paddle Switches • Up to 5A 120VAC or 28VDC rating, also available in gold • Panel or PC board mount design
What kind of switch mount to DIN rail?
Built into a terminal block, these switches mount to DIN rail. Able to withstand splashing, dirt, and high vibration, these switches meet MIL-S- 83731. They’re half the size of most toggle switches to maximize the space in a panel.
How are panel switches used to save space?
Save space on a panel by using one switch to perform multiple switching functions. Install in 14 mm dia. cutouts. Because these switches mount flush against a panel, they’re easy to clean and hard to damage. Operate low-voltage devices that require less than 48 volts, such as doorbells and buzzers. Immediately cut power with a single push.
Can You Make your own 30 mm panel switch?
Choose an actuator and contact block to make your own 30 mm switch. Choose an actuator and contact block to make your own 16 mm switch. Sized for 22 mm dia. panel cutouts, these switches require a key to turn circuits on or off, limiting access to sensitive equipment. Install these key switches in 30 mm dia. panel cutouts.