How do I log into my ProCurve switch?

How do I log into my ProCurve switch?

Log into your ProCurve using SSH or Telnet. Select Run Setup in the menu either by hitting 8 or using the arrow keys then hitting enter. Using the arrow keys, select Logon Default. Hit space to change Logon Default to CLI.

What is the default IP of HP switch?

192.168.2.10
Switch factory-default settings

Parameter	Factory Default Setting
Password
IP address	192.168.2.10
Subnet mask	255.255.255.0
Default gateway	Not set

How do I access the HP ProCurve switch web interface?

Verify the configuration Enter https://10.1.1.1 in the address bar, and select the certificate issued by new-ca. Then the web login page of the Device appears. On the login page, type the username usera, and password 123 to enter the web management page.

How do I change the IP address on my HP ProCurve switch?

HP Procurve Switch # Use the [Tab] key to select the Manager Password field and enter a manager password of up to 16 characters. [Tab] to the IP Config (DHCP/Bootp) field and use the Space bar to select the Manual option. [Tab] to the IP Address field and enter the IP address that is compatible with your network.

How do I setup my HP ProCurve switch?

How to: Configure a HP ProCurve switch

1. Step 1: Connect your serial connection.
2. Step 2: Conenct PuTTY.
3. Step 3: Get the IP address.
4. Step 4: Set time server.
5. Step 5: Set SNMP community info.
6. Step 6: Launch the web GUI.
7. Step 7: Configure basic info.
8. Step 8: Create VLANs.

What is the default username and password for HP ProCurve switch?

The default username for first time configuration is admin, no password is required. Usernames and passwords are case sensitive.

How do I connect my HP ProCurve switch?

How do I configure my HP ProCurve switch to 1800 24G?

HP ProCurve 1800-24G Switch – Installing the Switch

1. Installation precautions.
2. Prepare the installation site.
3. Verify the switch passes self test.
4. Mount the switch.
5. Connect the switch to a power source.
6. Connect the network cables.
7. Installing or Removing mini-GBICs.

How do I setup my HP ProCurve Switch?

What is the default password for HP switch?

How do I find the IP address of my switch?

Complete these steps

1. Select the Start button located in the bottom left corner.
2. Type Run into the Start Menu search and press Enter.
3. Type CMD and press Enter.
4. Type ipconfig/all and press Enter.
5. Your network’s IP information should now be displayed in a list.

How do I find the IP address of my HP switch?

A switch should have a web interface and a telnet interface. Another approach would be to use the arp command to find its IP address from the Mac address (which should be physically labeled on it somewhere).