Can I use bleach to clean water softener?

Can I use bleach to clean water softener?

If you notice mold in your water softener tank, you can run what’s known as a “bleach cycle” through the whole unit. Be sure to refer to your softener’s manual to confirm the manufacturer approves this method. For a 9-inch tank, you’ll want to place one cup of bleach in the brine tank. For a 12-inch tank, use two cups.

How do you run bleach through a water softener?

How to Run a Bleach Cycle Through a Water Softener

1. Locate the brine tank and remove the lid.
2. Pour 1 cup bleach into a 9-inch tank or 2 cups bleach into a 12-inch tank.
3. Locate the cycle panel on the water conditioner.
4. Do not use water in the home for drinking until you run the manual recharge process.

What kind of bleach do you use in a water softener?

Note 2: bleach concentration recommendations for water softener resin tank sanitation. In sanitizing a water softener resin tank using bleach (5% sodium hypochlorite or household bleach, un-scented liquid) the objective is to get a bleach concentration (5% household bleach or sodium hypochlorite) of 50 to 100 ppm.

Will bleach damage a water softener?

For some water softeners, you can run what is known as a “bleach cycle'”, for other models, its may entirely destroy the system. Bleach may interfere with the resin and hinder the ion exchange process.

Can I put bleach in my brine tank?

Do not use splash proof bleach or bleach with any additives. Add new salt to the brine tank. Pour three gallons of fresh, clean water into the brine tank. Add three teaspoons (1.5oz) of 5.25% unscented household bleach into the brine tank to make a chlorinated water solution.

Can you run chlorine through a water softener?

Impacts of Chlorine When water with a chlorine level of above 1.0 ppm passes through a water softener, the chlorine will oxidize the resin beads. This oxidation can affect the softening process and cut the life of your resin in half.

How do you clean a resin bed in a water softener?

There are two ways to clean the tank: The first is to unplug the water softener unit and remove the resin tank by unscrewing the bolts and disconnecting the valve. You can then clean the tank using bleach and water before reinstalling the tank.

Should you put bleach in your brine tank?

Do not use splash proof bleach or bleach with any additives. Add new salt to the brine tank. Note: We strongly recommend using solar salt inside our systems. Pour three gallons of fresh, clean water into the brine tank.

How do you chlorinate a water softener?

B. Water Softeners Disinfect the water softener either just before or immediately after the water system is disinfected. To disinfect the softener add 1/4 to 1/2cup of household bleach to the small fill tube (3-4 inch) in the large brine (salt) tank and do a manual recharge. (Do not use more than 1/2 cup of bleach.)

Is chlorine bad for water softeners?

When water with a chlorine level of above 1.0 ppm passes through a water softener, the chlorine will oxidize the resin beads. This oxidation can affect the softening process and cut the life of your resin in half.

Can I put chlorine tablets in my water softener?

In high concentration, chlorine is damaging to the resins. When you have an odor, make sure it is in the cold water, not the hot, keep a tablet in the big blue. …