What size air compressor do I need for a Tornador?
All you need is a compressor with a discharge rate of at least 270 l per minute (4.5 cfm). This can be achieved using compressors with a reservoir of as little as 13 gallon capacity. Mobile detailers can now use the Tornador Black with a smaller, portable air compressor.
How much is a Tornador?
Tornador Car Cleaning Gun Tool Z-010
| Was: | $115.99 Details |
|---|---|
| You Save: | $10.99 (9%) |
How much air does a Tornador need?
The TORNADOR® Black cleaning tool requires a constant air pressure between 5.5 and 6.3 bar 78 to 90 psi, for optimum performance. DO NOT EXCEED 90 psi. CAUTION: Constant air supply rates vary depending on the size and power of the compressor.
What is a Tornador Cleaning Gun?
Clean & Air Dry Auto Surfaces with a Strong Gust of Air! The TORNADOR® Air Blow Out Gun works with your air compressor to blow debris and moisture out of hard-to-reach areas of a vehicle. The cone channels air into a powerful tornado-like motion that quickly lifts dirt and moisture from any surface.
Can I use air compressor to wash car?
In between thorough pressure washings, your air compressor could help with maintenance pressure washing. This could also be true with a more delicate job. For instance, say the powered toy car that the kids like to ride around in. An Air compressor as a pressure washer could help for such a job.
What size air compressor do I need for detailing?
The ideal air compressor tank size is anywhere between 5-20 gallons; it will be enough for most car detailing jobs. Some compressors are in vertical style, and they don’t take too much space, even though they have a 20-gallon tank.
What chemicals are used in Tornador?
For Best Results: Pour two ounces of Interior Super Soap in your Tornador tank and fill the rest of the tank with water. Spray down your desired surfaces, wiping the excess with a Microfiber Towel when finished. The Tornador also has an air gun that can be used to dry cracks and crevices where water is trapped.
How does a Tornador work?
The Tornador is a special designed tool that uses compressed air to blow out dirt from a certain surface. The straw inside the funnel-shaped tip makes the air rotate very quickly, making it possible to work on a much greater surface.
Which air compressor should I buy?
Determine which one requires the highest CFM at the highest PSI. Add 50% to the required CFM for a margin of safety, and look for a compressor that meets the requirement. For example, if a tool requires 3 CFM at 90 PSI, select a compressor that delivers at least 4.5 CFM at 90 PSI.
What is a Tornador used for?
What do you put in a Tornador?
Which is the best car cleaning gun Tornador?
The Tornador Black Z-020RS Car Cleaning Gun is the new version of the ever popular Z-020, with a number of improvements over the previous version for a more reliable and better overall tool. Professional detailers will love the speed and effectiveness of the Tornador Black Z-020S.
What is discharge rate of Tornador black z-020rs car cleaning gun?
The Tornador Black Z-020RS Car Cleaning Gun produces enormous power with a very small air compressor. All you need is a compressor with a discharge rate of at least 270 l per minute (9.55 cfm). This can be achieved using compressors with a reservoir of as little as 50 litre capacity.
What do you use Tornador blow gun for?
For exterior car cleaning use to remove water from window seams, door, hood and trunk jambs, wheels and engine compartments to avoid dripping. The Tornador Blow Out Tool makes cleaning and drying your vehicle faster and more efficient.
What kind of air compressor does Tornador blow out use?
The Tornador Blow Out Tool works best with air compressors operating between 60 and 90 psi. It has multiple detailing uses. For interior car cleaning use to blow out crumbs and dust between seats, seams of seats and dashboards, cup holders, and any hard to reach areas.